No Products in the Cart
Every beachBUB® All-In-One Beach Umbrella System includes the Umbrella, the beachBUB® ULTRA Base, the oversized Carry Bag, the Towel Hook Collar, the Sand Scoop Shovel, and the Sand Gopher Tool to help you easily create a hole in the sand for your umbrella pole.
Stainless Steel Hardware
The chain and hitch pin as well as the collar bolts now feature stainless steel to prevent rusting and corrosion.
Commercial Grade Three Piece Hub Design
A common problem with typical beach umbrellas is canopy inversion. This is caused when the excessive force of the wind pulls the ribs away from the hub system. The average pulling force necessary to disengage a rib from a typical beach umbrella hub is about 40 lbs of pulling force. Our new three piece specially designed hub system has been tested at over 400 lbs of pulling force. We identified the weak link and made it stronger.
Canopy Tension Adjustment System
One of the major new additions in the most recent model of the beachBUB® Beach Umbrella System is the ability to adjust the tension of the umbrella canopy. We noticed that many other brands of beach umbrellas often struggle with ribs over time poking through the canopy, so we have reinforced the rib pockets on the umbrella canopy and added a T-shaped bracket inside each pocket. This new bracket prevents the rib from wearing on the canopy. It also allows us to insert a small plastic spacer plug in each rib pocket. These spacer plugs can be used to adjust the overall tension of the umbrella canopy. If your canopy is too tight and difficult to open, simply remove as many of the plugs as necessary to achieve the desired canopy tension. Likewise, if the canopy tension is too loose, simply add additional plugs in order to create more tension. (Additional plugs are provided and are located in the pocket of each carry bag.)
We Made the Bag Even Stronger
The umbrella system now also includes reinforcement stitching at 11 different stress points on the oversized carry bag and the shoulder strap width has been increased and extra padding added. We’ve made the drawstring and button stop more heavy duty than ever.
How It Works
Prepare the Space
If the sand is really dry and powdery, start by brushing away the very top layer of dry sand to make a nice firm flat space for your umbrella base. Lay the beachBUB® flat onto the beach. Use the Sand Gopher Tool by inserting it into the sand through the center hole of the beachBUB®.
Push the Sand Gopher into the sand giving it a quarter turn twist as you go. Then simply pull the Sand Gopher out and it will remove a plug of sand. Fling the sand out of the Sand Gopher and repeat until you have a hole that is 11 inches deep.
Insert the bottom pole through the center hole of the beachBUB® up to the orange label. Connect 2 wings to form a pouch. Fill the base halfway with sand. Attach the 3rd wing to form the pyramid base. Completely fill the base with sand.
Insert your umbrella into the base, sit down and enjoy a relaxing stress free day on the beach.
Improved Warranty Coverage
We are so confident in the quality of this umbrella system that we cover every single All-In-One Umbrella System with a 3-Year Protection Plan and a LIFETIME Warranty on the Umbrella Base. The beachBUB® Protection Plan covers all damage and loss. It even covers damage to the umbrella in the unlikely event of an umbrella tipping over due to the base not being completely filled. Check out complete details here.